[gobolinux-devel] [gobolinux-users] Udev errors

[rubisher]

Hello Hisham,

Hisham Muhammad wrote:
> On 9/22/07, rubisher <rubisher at scarlet.be> wrote:
>> Hisham Muhammad wrote:
>>> On 9/14/07, rubisher <rubisher at scarlet.be> wrote:
>>>> Hello Hisham,
>>>>
>>>> This recipe seems to be better to me but I still need some help:
>>>>
>>>> even thought I ask to use all new config files when I "Compile Udev--115--recipe.tar.bz2" ,
>>>> - I still have messages udevd complaining of "console group" (unfortunatley I don't know how to start my box from a serial
>>>> port to grab accurate messages)
>>>> - I couldn't setup my eth0 or eth1 (iirc devices not found?)
>>>> - finaly init boot scripts hung on "Set console font" (need Ctrl-Alt-Del ;-( )
>>>>
>>>> Sorry no clue on udev to help more (simply because my linux boxes are a bit too old to need or to be able to play with udev)
>>> Some of those errors are odd, but may be related to the mounting
>>> problems I just wrote about in another post of this thread, where I
>>> also posted an updated version to the Udev recipe and some related
>>> instructions.
>>>
>> Ok I read your other related reply ;-)
>>
>>> Any lingering references to the 'console' group may be caused by other
>>> packages that also install Udev rules. After upgrading, if you still
>>> get references to 'console', please try running
>>>
>>> grep 'GROUP="console"' /System/Settings/udev/rules.d/*
>>>
>> Brother at etchome /System/Settings] grep 'GROUP="console"' /System/Settings/udev/rules.d/*
>> /System/Settings/udev/rules.d/60-libpisock.rules:ATTRS{idVendor}=="054c", ATTRS{idProduct}=="0038", GROUP="console", MODE="0664"
[snip]
>> /System/Settings/udev/rules.d/60-libpisock.rules:ATTRS{idVendor}=="12ef", ATTRS{idProduct}=="0100", GROUP="console", MODE="0664"
>> /System/Settings/udev/rules.d/60-libpisock.rules:ATTRS{idVendor}=="4766", ATTRS{idProduct}=="0001", GROUP="console", MODE="0664"
> 
> Ok, these are from the Pilot-Link package. I just uploaded a new
> recipe, so if you 'Compile pilot-link 0.12.2-r2' this should go away
> (this new revision should show up in the repo later today).
> 
Ok I will wait a bit (don't worry I can be patient ;-) )

>>> so we can find out who is it that's looking for it.
>>>
>>> All feedback for helping to test this recipe is welcome,
>>>
>> I will try to find more details on howto grab the boot scripts output from serial port (it too quick for me to read all, sorry)
> 
Sorry I didn't have time to look for more details on a method to grab stuff from a serial port :_(

> For reference, are you still having these problems? ->
> 
>> - I couldn't setup my eth0 or eth1 (iirc devices not found?)
>> - finaly init boot scripts hung on "Set console font" (need Ctrl-Alt-Del ;-( )
> 
Appology, (it was in my mind to give those details and I forget) but unfortunately yes (the 2 pb)
I don't know if it's important but I running a kernel 2.6.22.1 (build with 'official' gobolinux recipe, I mean the one I 
found in <http://gobolinux.org/recipe-store/> and not yet a customized of mine in which I could lake this or those detail ;<)


> -- Hisham


Tx again for your support,
	r.