[gobolinux-users] Beryl, Mesa, error...

Viola Zoltán violazoli at gmail.com
Tue Apr 24 15:20:22 UTC 2007 

Dear Jonas, as "blank screen" I think to the "white screen" with the
nVidia-logo as startup. In UhuLinux can I see this, but in GoboLinux cannot
see.

Zoli

2007/4/24, Jonas Karlsson <jonka750 at student.liu.se>:
>
> You can only connect to the X-server with the same user as started the
> server unless you specifically allow other users/hosts to connect. So all
> command I tell you to run should be ran as regular user, unless I say
> otherwice.
> I do not understand what you mean about "blank screen", but I'm guessing
> it's not that important.
>
> However, to focus on your problem, could you try to comment out the
> dri-stuff, i.e. but a # in front of the row 'Load "dri"' and in front of
> every row in the new dri-section? Then restart X and try 'glxinfo | grep
> -i direct' again.
>
> If it doesn't work, send me xorg.conf and Xorg.0.log again.
>
> /Jonas
>
> On Mon, 23 Apr 2007 18:39:15 +0200, Viola Zoltán <violazoli at gmail.com>
> wrote:
>
> > Dear Jonas, I changed the xorg.conf as you that say me, but if I type as
> > non-root user:
> >
> > vz at Csiszilla /Users]glxinfo | grep -i direct
> > direct rendering: No
> >
> > as "root" (privilegized) user:
> >
> > pv at Csiszilla /Users]glxinfo | grep -i direct
> > No protocol specified
> > Error: unable to open display (null)
> >
> > I attache the (new) xorg.conf and the /System/Variables/log/Xorg.0.log.
> >
> > The nVidia is me installed with "Compile nvidia", but I not see the
> > "blank
> > screen" at startup...
> >
> > Zoli
> >
> >
> >
> > 2007/4/23, Jonas Karlsson <jonka750 at student.liu.se>:
> >>
> >> Ok, first, make sure you have the Nvidia package installed. If you
> >> don't you have to install that first (Compile nvidia)
> >>
> >> Then open your xorg.conf in an editor and in the "Device" section,
> >> change (unless it's already changed)
> >> Driver "nv"
> >> to
> >> Driver "nvidia"
> >>
> >> and add the following lines (mind the acsii scissors) to the same
> >> section:
> >>
> >> #---%<-----------------------------------------
> >> Option         "AddARGBGLXVisuals" "True"
> >> Option         "RenderAccel" "True"
> >> Option         "AllowGLXWithComposite" "True"
> >> Option         "backingstore" "True"
> >> Option         "TripleBuffer" "True"
> >> #--->%-----------------------------------------
> >>
> >> then, as new sections, add these lines to your xorg.conf:
> >>
> >> #----------%<--------------------------------------------------
> >> Section "Extensions"
> >>         Option "Composite" "Enable"
> >> Endsection
> >>
> >> Section "DRI"
> >>         Group 0
> >>         Mode 0666
> >> EndSection
> >> #------->%------------------------------------------------
> >>
> >> and then restart X and try 'glxinfo | grep -i direct' again.
> >>
> >> If yoy get a line saying "direct rendering: Yes", you can try beryl
> >> again (always started as normal user). If it doesn't start, I want the
> >> output.
> >> In case you don't get "direct rendering: Yes", I need a copy of your
> >> /System/Variables/log/Xorg.0.log.
> >>
> >> I have never set up accelerated graphics with an nvidia card, so if
> >> anyone else has, please feel free to correct me or add details that
> >> I've missed.
> >>
> >> /Jonas
> >>
> >> 2007/4/23, Viola Zoltán <violazoli at gmail.com>:
> >> > Dear Jonas, the output for "direct rendering":
> >> >
> >> > glxinfo | grep -i direct
> >> > direct rendering: No
> >> >
> >> > In attachment I send the /System/Settings/X11/xorg.conf
> >> >
> >> > In this file is, my nVidia card is GeForce FX 5200
> >> >
> >> > If I run the Beryl from a console as root:
> >> >
> >> > pv at Csiszilla /Programs/Xorg/Settings/X11]beryl
> >> > No protocol specified
> >> > xvinfo:  Unable to open display :0.0
> >> > No protocol specified
> >> > xdpyinfo:  unable to open display ":0.0".
> >> > **************************************************************
> >> > * Beryl system compatiblity check
> >> >  *
> >> > **************************************************************
> >> > No protocol specified
> >> > Error: unable to open display (null)
> >> > beryl: SmcOpenConnection failed: Authentication Rejected, reason :
> >> None
> >> of
> >> > the authentication protocols specified are supported and host-based
> >> > authentication failed
> >> > No protocol specified
> >> > beryl: Couldn't open display :0.0
> >> >
> >> >
> >> > If I run the Beryl from a console as non-root user:
> >> >
> >> > vz at Csiszilla /Users]beryl
> >> > **************************************************************
> >> > * Beryl system compatiblity check
> >> >  *
> >> > **************************************************************
> >> >
> >> > Detected xserver                                : AIGLX
> >> >
> >> > Checking Display : 0.0 ...
> >> >
> >> > Checking for XComposite extension               : failed
> >> >
> >> > No composite extension
> >> > beryl: No composite extension
> >> >
> >> >
> >> > Zoli
> >> >
> >> >
> >> > 2007/4/22, Jonas Karlsson < jonka750 at student.liu.se>:
> >> > > I'm asuming that you try to switch to beryl from beryl-manager. And
> >> it's
> >> > > really enough with the Emerald window decorator, unless you want to
> >> use
> >> > > KDE themes (which is what Aquamarine does).
> >> > >
> >> > > Most probably you Xorg isn't configured to be accelerated. Try
> >> 'glxinfo|
> >> > > grep -i direct', it should give you a line that says "direct
> >> rendering:
> >> > > Yes" if everything is set up correctly.
> >> > > Otherwice I can try to help you. Then I need what model your Nvidia
> >> card
> >> > > is, your /System/Settings/X11/Xorg.conf file, the output from when
> >> you
> >> run
> >> > > 'beryl' from a console.
> >> > >
> >> > > /Jonas
> >> > >
> >> > > On Sun, 22 Apr 2007 00:33:08 +0200, Viola Zoltán
> >> <violazoli at gmail.com>
> >> > > wrote:
> >> > >
> >> > > > Thank you dear Jonas, the compile of beryl is succeeded. I have
> >> Emerald,
> >> > > > but
> >> > > > not find recipe for aquamarine. But, the very problem is: how can
> >> I
> >> use
> >> > > > Beryl?! If I click "Select Window manager -> Beryl", make
> nothing,
> >> and
> >> > > > the
> >> > > > system re-set the XFWM4 or KWin!
> >> > > >
> >> > > > Can you give me a link, to "How the Beryl works"?
> >> > > >
> >> > > > Zoli
> >> > > >
> >> > > > 2007/4/21, Jonas Karlsson <jonka750 at student.liu.se>:
> >> > > >>
> >> > > >> I named two of them, Emerald and Aquamarine. Use Compile.
> >> > > >>
> >> > > >> /Jonas
> >> > > >>
> >> > > >> On Sat, 21 Apr 2007 19:18:11 +0200, Viola Zoltán <
> >> violazoli at gmail.com>
> >> > > >> wrote:
> >> > > >>
> >> > > >> > And, how can I build and find decorators?
> >> > > >> >
> >> > > >> > Zoli
> >> > > >> >
> >> > > >> > 2007/4/21, Jonas Karlsson < jonka750 at student.liu.se>:
> >> > > >> >>
> >> > > >> >> It shouldn't matter, because if you do it any order the
> >> dependencies
> >> > > >> >> should fix the order, e.g. if you try to install
> >> > > >> beryl-settings-manager
> >> > > >> >> it
> >> > > >> >> has the dependency beryl-settings-bindings and will therefore
> >> ask
> >> > you
> >> > > >> if
> >> > > >> >> you want to install beryl-settings-bindings before
> >> > > >> >> beryl-settings-manager
> >> > > >> >> (which, of course, you want). So you don't have to mind the
> >> build
> >> > > >> order
> >> > > >> >> as
> >> > > >> >> if a dependency isn't installed Compile will ask you to
> >> install
> >> it.
> >> > > >> >>
> >> > > >> >> Don't forget to build a window decorator that supports Beryl
> >> > (Emerald
> >> > > >> or
> >> > > >> >> Aquamarine).
> >> > > >> >>
> >> > > >> >> /Jonas
> >> > > >> >>
> >> > > >> >> On Sat, 21 Apr 2007 14:44:41 +0200, Viola Zoltán
> >> > > >> <violazoli at gmail.com>
> >> > > >> >> wrote:
> >> > > >> >>
> >> > > >> >> > And, If I see good, it is not have meta-recipe to beryl.
> >> What
> >> is
> >> > > >> the
> >> > > >> >> > preferred order of installing of the BerylProg-parts?
> >> > > >> >> >
> >> > > >> >> > Zoli
> >> > > >> >> >
> >> > > >> >> > 2007/4/19, Jonas Karlsson < jonka750 at student.liu.se>:
> >> > > >> >> >>
> >> > > >> >> >> You should install the kernel headers the way I instructed
> >> you.
> >> > > >> The
> >> > > >> >> >> kernel
> >> > > >> >> >> headers is not the same thing as the kernel source.
> Install
> >> the
> >> > > >> >> kernel
> >> > > >> >> >> headers with 'InstallPackage linux-headers' and try to
> >> Compile
> >> > > >> Mesa
> >> > > >> >> >> again.
> >> > > >> >> >>
> >> > > >> >> >> /Jonas
> >> > > >> >> >>
> >> > > >> >> >> On Thu, 19 Apr 2007 13:27:04 +0200, Viola Zoltán
> >> > > >> >> <violazoli at gmail.com>
> >> > > >> >> >> wrote:
> >> > > >> >> >>
> >> > > >> >> >> > I not use the "InstallPackage linux-headers" command,
> but
> >> first
> >> > > >> >> >> download
> >> > > >> >> >> > it,
> >> > > >> >> >> > and copy to the /Files/Compile/Sources directory, as
> this
> >> is
> >> > > >> >> written
> >> > > >> >> >> in
> >> > > >> >> >> > the
> >> > > >> >> >> > Gobolinux homepage at theselink:
> >> > > >> >> >> >
> >> > http://gobolinux.org/index.php?lang=en_US&page=downloads
> >> > > >> >> >> >
> >> > > >> >> >> > Kernel headers
> >> > > >> >> >> >>
> >> > > >> >> >> >> The kernel headers for this release can be downloaded
> >> > > >> >> >> >> here<
> >> > > >> >> >>
> >> > > >> >>
> >> > > >>
> >> >
> >>
> http://gobolinux.org/download/kernel/linux-2.6.17.11-smp-headers.tar.bz2
> >> > >.
> >> > > >> >> >> >> If you need to compile extra drivers, just unpack this
> >> tarball
> >> > > >> at
> >> > > >> >> >> >> /Files/Compile/Sources and proceed with the driver's
> >> > > >> installation
> >> > > >> >> >> >> process.
> >> > > >> >> >> >>
> >> > > >> >> >> >
> >> > > >> >> >> > Zoli
> >> > > >> >> >> >
> >> > > >> >> >> >
> >> > > >> >> >> >
> >> > > >> >> >> >
> >> > > >> >> >> > 2007/4/19, Jonas Karlsson <jonka750 at student.liu.se >:
> >> > > >> >> >> >>
> >> > > >> >> >> >> On Thu, 19 Apr 2007 11:43:21 +0200, Viola Zoltán
> >> > > >> >> >> <violazoli at gmail.com >
> >> > > >> >> >> >> wrote:
> >> > > >> >> >> >>
> >> > > >> >> >> >> > I probe Compile Beryl, but not know, in witch order
> >> should I
> >> > > >> >> have.
> >> > > >> >> >> I
> >> > > >> >> >> >> > probe
> >> > > >> >> >> >> > first "Compile Beryl-Core". It have dependencies.
> And,
> >> as I
> >> > > >> >> Compile
> >> > > >> >> >> >> the
> >> > > >> >> >> >> > Mesa, it make me the following error:
> >> > > >> >> >> >> >
> >> > > >> >> >> >> > makedepend: warning:  ../common/dri_util.c (reading
> >> > > >> >> >> >> > /usr/include/sys/mman.h,
> >> > > >> >> >> >> > line 26): cannot find include file "stddef.h"
> >> > > >> >> >> >> >         not in ./stddef.h
> >> > > >> >> >> >> >         not in
> >> > > >> >> ../../../../../src/mesa/drivers/dri/common/stddef.h
> >> > > >> >> >> >> >         not in server/stddef.h
> >> > > >> >> >> >> >         not in ../../../../../include/stddef.h
> >> > > >> >> >> >> >         not in
> >> > ../../../../../include/GL/internal/stddef.h
> >> > > >> >> >> >> >         not in
> >> > ../../../../../src/mesa/stddef.h
> >> > > >> >> >> >> >         not in
> >> > ../../../../../src/mesa/main/stddef.h
> >> > > >> >> >> >> >         not in
> >> > ../../../../../src/mesa/glapi/stddef.h
> >> > > >> >> >> >> >         not in
> >> > ../../../../../src/mesa/math/stddef.h
> >> > > >> >> >> >> >         not in
> >> > ../../../../../src/mesa/transform/stddef.h
> >> > > >> >> >> >> >         not in
> >> > ../../../../../src/mesa/shader/stddef.h
> >> > > >> >> >> >> >         not in
> >> > ../../../../../src/mesa/swrast/stddef.h
> >> > > >> >> >> >> >         not in
> >> > ../../../../../src/mesa/swrast_setup/stddef.h
> >> > > >> >> >> >> >         not in
> >> > ../../../../../src/egl/main/stddef.h
> >> > > >> >> >> >> >         not in
> >> > ../../../../../src/egl/drivers/dri/stddef.h
> >> > > >> >> >> >> >         not in
> >> > /Programs/Xorg/7.1/include/stddef.h
> >> > > >> >> >> >> >         not in
> >> > /Programs/Xorg/7.1/include/drm/stddef.h
> >> > > >> >> >> >> >         not in /usr/include/stddef.h
> >> > > >> >> >> >> > make[6]: Leaving directory
> >> `/Files/Compile/Sources/Mesa-
> >> > 6.5.2
> >> > > >> >> >> >> > /src/mesa/drivers/dri/i810'
> >> > > >> >> >> >>
> >> > > >> >> >> >> Do you have Linux-Headers installed? Could you try
> >> > > >> 'InstallPackage
> >> > > >> >> >> >> linux-headers' and try compilation again?
> >> > > >> >> >> >>
> >> > > >> >> >> >>
> >> > > >> >> >> >> > make[6]: Entering directory
> >> > > >> `/Files/Compile/Sources/Mesa-6.5.2
> >> > > >> >> >> >> [...]
> >> > > >> >> >> >> > gcc -c -I.
> >> > -I../../../../../src/mesa/drivers/dri/common
> >> > > >> -Iserver
> >> > > >> >> >> >> > -I../../../../../include
> >> > -I../../../../../include/GL/internal
> >> > > >> >> >> >> > -I../../../../../src/mesa
> >> -I../../../../../src/mesa/main
> >> > > >> >> >> >> > -I../../../../../src/mesa/glapi
> >> > > >> -I../../../../../src/mesa/math
> >> > > >> >> >> >> > -I../../../../../src/mesa/transform
> >> > > >> >> >> -I../../../../../src/mesa/shader
> >> > > >> >> >> >> > -I../../../../../src/mesa/swrast
> >> > > >> >> >> >> -I../../../../../src/mesa/swrast_setup
> >> > > >> >> >> >> > -I../../../../../src/egl/main
> >> > > >> >> -I../../../../../src/egl/drivers/dri
> >> > > >> >> >> >> > `pkg-config --cflags libdrm`  -Wall
> >> -Wmissing-prototypes
> >> > > >> >> -std=c99
> >> > > >> >> >> >> > -ffast-math -O -g -fPIC  -D_POSIX_SOURCE
> >> > > >> >> -D_POSIX_C_SOURCE=199309L
> >> > > >> >> >> >> > -D_SVID_SOURCE -D_BSD_SOURCE -D_GNU_SOURCE -DPTHREADS
> >> > > >> >> >> >> > -DUSE_EXTERNAL_DXTN_LIB=1 -DIN_DRI_DRIVER
> >> > > >> -DGLX_DIRECT_RENDERING
> >> > > >> >> >> >> > -DGLX_INDIRECT_RENDERING -DHAVE_ALIAS
> >> -DHAVE_POSIX_MEMALIGN
> >> > > >> >> >> >> > ../common/vblank.c -o ../common/vblank.o
> >> > > >> >> >> >> > ../common/vblank.c: In function
> 'driGetCurrentVBlank':
> >> > > >> >> >> >> > ../common/vblank.c:306: error: 'DRM_VBLANK_SECONDARY'
> >> > > >> undeclared
> >> > > >> >> >> >> (first
> >> > > >> >> >> >> > use
> >> > > >> >> >> >> > in this function)
> >> > > >> >> >> >> > ../common/vblank.c:306: error: (Each undeclared
> >> identifier
> >> > is
> >> > > >> >> >> reported
> >> > > >> >> >> >> > only
> >> > > >> >> >> >> > once
> >> > > >> >> >> >> > ../common/vblank.c:306: error: for each function it
> >> appears
> >> > > >> in.)
> >> > > >> >> >> >> > ../common/vblank.c: In function 'driWaitForVBlank':
> >> > > >> >> >> >> > ../common/vblank.c:363: error: 'DRM_VBLANK_SECONDARY'
> >> > > >> undeclared
> >> > > >> >> >> >> (first
> >> > > >> >> >> >> > use
> >> > > >> >> >> >> > in this function)
> >> > > >> >> >> >> > make[6]: *** [../common/vblank.o] Error 1
> >> > > >> >> >> >> > make[6]: Leaving directory
> >> > `/Files/Compile/Sources/Mesa-6.5.2
> >> > > >> >> >> >> > /src/mesa/drivers/dri/i810'
> >> > > >> >> >> >> > make[5]: *** [subdirs] Error 1
> >> > > >> >> >> >> > make[5]: Leaving directory
> >> > `/Files/Compile/Sources/Mesa-6.5.2
> >> > > >> >> >> >> > /src/mesa/drivers/dri'
> >> > > >> >> >> >> > make[4]: *** [linux-solo] Error 2
> >> > > >> >> >> >> > make[4]: Leaving directory
> >> > > >> >> >> >> `/Files/Compile/Sources/Mesa-6.5.2/src/mesa'
> >> > > >> >> >> >> > make[3]: *** [default] Error 2
> >> > > >> >> >> >> > make[3]: Leaving directory
> >> > > >> >> >> >> `/Files/Compile/Sources/Mesa-6.5.2/src/mesa'
> >> > > >> >> >> >> > make[2]: *** [subdirs] Error 1
> >> > > >> >> >> >> > make[2]: Leaving directory
> >> > > >> >> `/Files/Compile/Sources/Mesa-6.5.2/src'
> >> > > >> >> >> >> > make[1]: *** [default] Error 1
> >> > > >> >> >> >> > make[1]: Leaving directory
> >> > > >> `/Files/Compile/Sources/Mesa-6.5.2'
> >> > > >> >> >> >> > make: *** [linux-dri] Error 2
> >> > > >> >> >> >> > Compile: Build failed.
> >> > > >> >> >> >> >
> >> > > >> >> >> >> I don't know if that last error depends on the first
> >> error,
> >> > but
> >> > > >> >> could
> >> > > >> >> >> >> you
> >> > > >> >> >> >> try to install the linux headers and try to compile
> Mesa
> >> > again?
> >> > > >> >> >> >>
> >> > > >> >> >> >> --
> >> > > >> >> >> >> /Jonas
> >> > > >> >> >> >>
> >> > > >> >> >> >> Using Opera's revolutionary e-mail client:
> >> > > >> >> http://www.opera.com/mail/
> >> > > >> >> >> >>
> >> > _______________________________________________
> >> > > >> >> >> >> gobolinux-users mailing list
> >> > > >> >> >> >> gobolinux-users at lists.gobolinux.org
> >> > > >> >> >> >>
> >> > http://lists.gobolinux.org/mailman/listinfo/gobolinux-users
> >> > > >> >> >> >>
> >> > > >> >> >> >
> >> > > >> >> >> >
> >> > > >> >> >> >
> >> > > >> >> >>
> >> > > >> >> >>
> >> > > >> >> >>
> >> > > >> >> >> --
> >> > > >> >> >> Using Opera's revolutionary e-mail client:
> >> > > >> http://www.opera.com/mail/
> >> > > >> >> >> _______________________________________________
> >> > > >> >> >> gobolinux-users mailing list
> >> > > >> >> >> gobolinux-users at lists.gobolinux.org
> >> > > >> >> >>
> >> > http://lists.gobolinux.org/mailman/listinfo/gobolinux-users
> >> > > >> >> >>
> >> > > >> >> >
> >> > > >> >> >
> >> > > >> >> >
> >> > > >> >>
> >> > > >> >>
> >> > > >> >>
> >> > > >> >> --
> >> > > >> >> Using Opera's revolutionary e-mail client:
> >> > http://www.opera.com/mail/
> >> > > >> >> _______________________________________________
> >> > > >> >> gobolinux-users mailing list
> >> > > >> >> gobolinux-users at lists.gobolinux.org
> >> > > >> >>
> >> > http://lists.gobolinux.org/mailman/listinfo/gobolinux-users
> >> > > >> >>
> >> > > >> >
> >> > > >> >
> >> > > >> >
> >> > > >>
> >> > > >>
> >> > > >>
> >> > > >> --
> >> > > >> Using Opera's revolutionary e-mail client:
> >> http://www.opera.com/mail/
> >> > > >> _______________________________________________
> >> > > >> gobolinux-users mailing list
> >> > > >> gobolinux-users at lists.gobolinux.org
> >> > > >>
> >> > http://lists.gobolinux.org/mailman/listinfo/gobolinux-users
> >> > > >>
> >> > > >
> >> > > >
> >> > > >
> >> > >
> >> > >
> >> > >
> >> > > --
> >> > > Using Opera's revolutionary e-mail client:
> >> http://www.opera.com/mail/
> >> > > _______________________________________________
> >> > > gobolinux-users mailing list
> >> > > gobolinux-users at lists.gobolinux.org
> >> > >
> >> > http://lists.gobolinux.org/mailman/listinfo/gobolinux-users
> >> > >
> >> >
> >> >
> >> >
> >> > --
> >> >
> >> > Honlapom: http://poliverzum.birodalom.net/powi
> >> > Fórumom: http://birodalom.net/forum
> >> >
> >> > A #86-os sorszámú hivatalosan bejegyzett GoboLinux felhasználó
> >> > The #86 official GoboLinux-user
> >> >
> >> > A GoboLinux felhasználók hivatalos magyar fóruma:
> >> > The official forum for the hungarian GoboLinux-users:
> >> > http://linux.birodalom.net/smf
> >> > _______________________________________________
> >> > gobolinux-users mailing list
> >> > gobolinux-users at lists.gobolinux.org
> >> > http://lists.gobolinux.org/mailman/listinfo/gobolinux-users
> >> >
> >> >
> >> >
> >> _______________________________________________
> >> gobolinux-users mailing list
> >> gobolinux-users at lists.gobolinux.org
> >> http://lists.gobolinux.org/mailman/listinfo/gobolinux-users
> >>
> >
> >
> >
>
>
>
> --
> Using Opera's revolutionary e-mail client: http://www.opera.com/mail/
> _______________________________________________
> gobolinux-users mailing list
> gobolinux-users at lists.gobolinux.org
> http://lists.gobolinux.org/mailman/listinfo/gobolinux-users
>



-- 
Honlapom: http://poliverzum.birodalom.net/powi
Fórumom: http://birodalom.net/forum

A #86-os sorszámú hivatalosan bejegyzett GoboLinux felhasználó
The #86 official GoboLinux-user

A GoboLinux felhasználók hivatalos magyar fóruma:
The official forum for the hungarian GoboLinux-users:
http://linux.birodalom.net/smf
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.gobolinux.org/pipermail/gobolinux-users/attachments/20070424/8619bff2/attachment-0001.htm

More information about the gobolinux-users mailing list