[gobolinux-users] [Xorg[ Couldn't load xkb keymap

[Daniele Maccari]

My name's Daniele, but that's ok :p
Anyway I basically did the same as you for fonts, remapping all the 
paths manually.

As for the keyboard one thing I've noticed is that it seems to work 
pretty fine even given the mentioned error. The only weird fact is that 
leds don't work at all, but maybe this has another explanation...

Bye

Giambattista Bloisi wrote:
> Hi Davide,
>     the same configuration seems to work fine with my installation (Xorg 
> 7.2 shipped with 014).
>
> Also the run-time change gives me no errors:
>
> setxkbmap -rules xorg -model pc105 -layout it -option ""
>
> Re font paths, below is my configuration. Basically I just mapped what 
> was into /Files/Fonts/.
>
> Section "Files"
>     RgbPath      "/System/Links/Shared/X11/rgb"
>     ModulePath   "/System/Links/Libraries/xorg/modules"
>     FontPath     "/Files/Fonts/Misc/"
>     FontPath     "/Files/Fonts/TTF/"
>     FontPath     "/Files/Fonts/OTF"
>     FontPath     "/Files/Fonts/Type1/"
>     FontPath     "/Files/Fonts/100dpi/"
>     FontPath     "/Files/Fonts/75dpi/"
>     FontPath     "/Files/Fonts/CID"
>     FontPath     "/Files/Fonts/Console"
>     FontPath     "/Files/Fonts/Cyrillic"
>     FontPath     "/Files/Fonts/Ghostscript"
>     FontPath     "/Files/Fonts/OpenType"
>     FontPath     "/Files/Fonts/TrueType"
> EndSection
>
> Regards,
> Giambattista
>
> Daniele Maccari wrote:
>   
>> I constantly get the title's error when starting X, either I'm root or not.
>> The part about the keyboard in the xorg.conf file follows:
>>
>> |Section "InputDevice"
>>
>> Identifier "Keyboard1"
>> Driver "kbd"
>>
>> Option "AutoRepeat" "500 30"
>>
>> # Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
>> # Option "Xleds" "1 2 3"
>>
>> # Option "LeftAlt" "Meta"
>> # Option "RightAlt" "ModeShift"
>>
>> # To customise the XKB settings to suit your keyboard, modify the
>> # lines below (which are the defaults). For example, for a non-U.S.
>> # keyboard, you will probably want to use:
>> # Option "XkbModel" "pc105"
>> # If you have a US Microsoft Natural keyboard, you can use:
>> # Option "XkbModel" "microsoft"
>> #
>> # Then to change the language, change the Layout setting.
>> # For example, a german layout can be obtained with:
>> # Option "XkbLayout" "de"
>> # or:
>> # Option "XkbLayout" "de"
>> # Option "XkbVariant" "nodeadkeys"
>> #
>> # If you'd like to switch the positions of your capslock and
>> # control keys, use:
>> # Option "XkbOptions" "ctrl:swapcaps"
>>
>> # These are the default XKB settings for Xorg
>> # Option "XkbRules" "xorg"
>> # Option "XkbModel" "pc105"
>> # Option "XkbLayout" "us"
>> # Option "XkbVariant" ""
>> # Option "XkbOptions" ""
>>
>> # Option "XkbDisable"
>>
>> Option "XkbRules" "xorg"
>> Option "XkbModel" "pc105"
>> Option "XkbLayout" "it"
>>
>> EndSection
>>
>> |Another problem I faced was the fact that no fonts could be found by 
>> the X server and I had to manually write their path in the configuration 
>> file. Is that normal?
>>
>> Thanks.
>> _______________________________________________
>> gobolinux-users mailing list
>> gobolinux-users at lists.gobolinux.org
>> http://lists.gobolinux.org/mailman/listinfo/gobolinux-users
>>
>>   
>>     
> _______________________________________________
> gobolinux-users mailing list
> gobolinux-users at lists.gobolinux.org
> http://lists.gobolinux.org/mailman/listinfo/gobolinux-users
>
>