[gobolinux-users] [gobolinux-devel] Udev errors
anshuman at brillgene.com
anshuman at brillgene.com
Wed Sep 5 16:49:46 UTC 2007
I got the same console and /Kernel/Device errors reported ...
Also, I booted through Colinux and things looked OK...however...
When I booted directly, it failed with the following USB errors ( I had been
running Gobo perfectly off the USB disk so far )...it kept looping back to
the USB full speed device detected prompt...and then USB
disconnect...something about configuration #1 chosen...
something in these rules breaks something in USB...but I can't pin point
what....
Sep 4 23:50:58 (none) kernel: [ 17.555000] udev: renamed network interface
eth0 to eth1
Sep 4 23:50:58 (none) kernel: [ 17.622000] eth0: Tigon3 [partno(BCM95751M)
rev 4101 PHY(5750)] (PCI Express) 10/100/1000Base-T Et
hernet 00:14:c2:e2:b0:18
Sep 4 23:50:58 (none) kernel: [ 17.622000] eth0: RXcsums[1] LinkChgREG[0]
MIirq[0] ASF[0] WireSpeed[1] TSOcap[1]
Sep 4 23:50:58 (none) kernel: [ 17.622000] eth0: dma_rwctrl[76180000]
dma_mask[64-bit]
Sep 4 23:51:10 (none) kernel: [ 32.137000] usb 5-1: USB disconnect,
address 3
Sep 4 23:51:10 (none) udevd-event[2195]: delete_path:
rmdir(/System/Kernel/Devices) failed: Device or resource busy
Sep 4 23:51:10 (none) udevd-event[2196]: delete_path:
rmdir(/System/Kernel/Devices) failed: Device or resource busy
Sep 4 23:51:10 (none) udevd-event[2198]: delete_path:
rmdir(/System/Kernel/Devices) failed: Device or resource busy
Sep 4 23:51:18 (none) kernel: [ 40.137000] usb 5-1: new full speed USB
device using ohci_hcd and address 5
Sep 4 23:51:18 (none) kernel: [ 40.338000] usb 5-1: configuration #1
chosen from 1 choice
Sep 4 23:51:48 (none) kernel: [ 70.115000] usb 5-1: USB disconnect,
address 5
Sep 4 23:51:48 (none) udevd-event[2231]: delete_path:
rmdir(/System/Kernel/Devices) failed: Device or resource busy
Sep 4 23:51:48 (none) udevd-event[2232]: delete_path:
rmdir(/System/Kernel/Devices) failed: Device or resource busy
Sep 4 23:51:48 (none) udevd-event[2234]: delete_path:
rmdir(/System/Kernel/Devices) failed: Device or resource busy
Sep 4 23:52:37 (none) kernel: [ 119.628000] usb 5-1: new full speed USB
device using ohci_hcd and address 6
Sep 4 23:52:37 (none) kernel: [ 119.829000] usb 5-1: configuration #1
chosen from 1 choice
Sep 4 23:53:08 (none) kernel: [ 150.097000] usb 5-1: USB disconnect,
address 6
Sep 4 23:53:08 (none) udevd-event[2267]: delete_path:
rmdir(/System/Kernel/Devices) failed: Device or resource busy
Sep 4 23:53:08 (none) udevd-event[2268]: delete_path:
rmdir(/System/Kernel/Devices) failed: Device or resource busy
Sep 4 23:53:08 (none) udevd-event[2270]: delete_path:
rmdir(/System/Kernel/Devices) failed: Device or resource busy
Sep 4 23:53:48 (none) kernel: [ 190.896000] usb 5-1: new full speed USB
device using ohci_hcd and address 7
Sep 4 23:53:49 (none) kernel: [ 191.096000] usb 5-1: configuration #1
chosen from 1 choice
Sep 4 23:54:19 (none) kernel: [ 221.193000] usb 5-1: USB disconnect,
address 7
Sep 4 23:54:19 (none) udevd-event[2303]: delete_path:
rmdir(/System/Kernel/Devices) failed: Device or resource busy
Sep 4 23:54:19 (none) udevd-event[2304]: delete_path:
rmdir(/System/Kernel/Devices) failed: Device or resource busy
Sep 4 23:54:19 (none) udevd-event[2306]: delete_path:
rmdir(/System/Kernel/Devices) failed: Device or resource bus
----- Original Message -----
From: "Hisham Muhammad" <hisham.hm at gmail.com>
To: gobolinux-users at lists.gobolinux.org, "Development of the GoboLinux
distribution" <gobolinux-devel at lists.gobolinux.org>
Date: Tue, 4 Sep 2007 12:21:20 -0300
Subject: Re: [gobolinux-devel] [gobolinux-users] Udev errors
> On 9/4/07, Isaac Dupree <isaacdupree at charter.net> wrote:
> > Hisham Muhammad wrote:
> > > On 9/3/07, Hisham Muhammad <hisham.hm at gmail.com> wrote:
> > >> Hi,
> > >>
> > >> I'm fighting with Udev as well. I'm working on a recipe for version
> > >> 115. I'll post it here before committing. Could you test it?
> > >>
> > >> Thanks in advance,
> > >
> > > And here is the Udev recipe I'm currently working with:
> > >
> > > http://hisham.gobolinux.org/Udev--115--recipe.tar.bz2
> >
> > My system runs with that recipe (all "use new" Settings), but complains
> > in log-messages about no "console" group because my system is 013-based.
> > (should recipes depend on group selection policies? do they have a
> choice?)
>
> Thanks for the report.
>
> I'm going to post a revised version using various groups instead of
> "console", because while debugging the ISO I soon realized that the
> "console" group simplification is a big maintenance headache. Really
> not worth it. I'll revert the changes made to use "console" (it's
> going to be a pain to scan through everything to make sure I don't
> miss anything).
>
> -- Hisham
> _______________________________________________
> gobolinux-devel mailing list
> gobolinux-devel at lists.gobolinux.org
> http://lists.gobolinux.org/mailman/listinfo/gobolinux-devel
>
More information about the gobolinux-users
mailing list